Disassembly of the spindle on the South Bend 13" lathe.
Included are tips for disassembly without damaging the bearings.
South Bend 13" Lathe Spindle-1
Reassembly of the spindle on the South Bend 13" lathe,
with the spindle upgraded to a D1-4 camlock version.
Tips and techniques seen, include shimming the spindle bearings
and doing lathe turning without a lathe.
South Bend 13" Lathe Spindle-2
Machining two blank D1-4 camlock back plates,
and fitting the chucks on a South Bend 13" lathe.
Using the Bridgeport DRO to drill mounting hole pattern.
South Bend 13" Lathe D1-4 Spindle Chuck Backplates
Workshop