| Link | Date | Description | Model/Size |
|---|
| Drawing 28C |
1934 |
SBL No. 28C, Standard Change Gear Combinations, 9W (405 early 9-inch Workshop). |
9W |
| Form 399 |
1938 |
SBL No. 399, Belt Tension Adjustment for Underneath Belt Motor Driven Lathe. |
Series: O, N, R, T |
| Bulletin H1 |
1946 |
SBL No. H1, Keep Your Lathe Clean. |
Series S |
| Bulletin H4 |
1946 |
SBL No. H4, Keep Your Lathe In Trim, Adjustments and Maintenance. |
Series S |
| Workshop 9A Gear Train |
1947 |
Workshop Model-A Gear Train, Pitch and tooth count. |
Series S |
| Form 999 |
1965 |
SBL No. 999, How to mount and adjust 9" - 10K end gear gaurd. |
9N-10K |
| Form 992C |
1965 |
SBL No. 992C, Installing Toggle Cam Operated Apron Clutch |
Series S: 10,13,14-1/2,16 |
| Form 2000 |
1965 |
SBL No. 2000, Maintenance, Back Gear and Eccentric Shaft. |
Series S: 9N, 10K, 10", 14-1/2" only |
| Form 2002 |
1965 |
SBL No. 2002, Headstock Spindle Sleeve Bearings. |
Series S: 10"-16" |
| Form 2003 |
1965 |
SBL No. 2003, Maintenance, How to Remedy a Sticky Clutch, adjusting Toggle Cam Apron Clutch. |
Series S: 10"-16" |
| Cross feed NK |
All |
Maintenance, Removal Cross Feed screw, 9-inch and 10K. |
9N-10K |
| Taper Cross feed RH |
All |
Maintenance, Removal Cross Feed, Taper attachment Telescopic screw. |
Series S: 10"-16" |
| Spindle Bearings NK |
All |
Maintenance, Headstock Bearing Adjustments, 9" Workshop and 10K. |
9N-10K |
| Spindle Removal 9N |
All |
Maintenance, Spindle Removal 9-inch Workshop. |
9N |
| Drive Belt Size |
All |
Maintenance, Drive Belt Sizes, S series lathes. |
All |
~Workshop